Light-Sport / Float Plane

NEARLY NEW BAUMANN 1500'S • $14,250 • AVAILABLE FOR SALE • These are Baumann BF1500's straight floats off of a Legend Cub. All mounting gear is included. Serial numbers are 23/24 manufactured in 2006. There are less than 150 hours on these floats and they are in excellent condition. When not mounted they have been stored in hangars or garage. Fresh water displacement is 1536 lb. Optional extras include lightning bolt paint (black on yellow), wire cable walkway, an extra storage compartment in each float (total two in each float), extra long steps. Call 716-829-9647 for more information and pictures; ask for Carl. Located Buffalo, NY. • Contact Carl M. Miller, Owner - located Orchard Park, NY USA • Telephone: 716-829-9647 . • Posted November 3, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Pictures

46 J3 CUB LSA FLOAT PLANE • $54,950 • FOR SALE BY OWNER • ELEC START, Recovered with ceconite in July 2009, 1950 TTAF, Restored EDO 1320 Floats. C90-12 159hrs SMOH with light weight starter and battery option. This is a beautiful airplane and a great float plane with the elec start. All metal spars, sealed struts, 18 gal wing tank, new glass and reconditioned yellow tagged metal prop by Maxwell. Will sell without the floats for $46,500.00. • Contact Robert A. Perkins, Owner - located Somerset, WI USA • Telephone: 715-222-0869 • Posted October 18, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Pictures

KINGFISHER AMPHIBIAN • $2,500 • PROJECT FOR SALE • The hard part is done; fuselage is built and covered with fiberglass, as is the wing tip floats. Interior has 2 coats of varnish sealer; the outside has UV primer on the glass. The landing gear is built, as is most of the custom metal brackets needed for this plane. The finished plane should weigh into the sport aircraft specs. A double yoke system along with misc. parts are included with the plane. Work in the plane is excellent. Main parts needed to finish the plane are wing panels and engine. Approx. cost to finish is $15,000+/- • Contact John F. Egizi, Owner - located Sebring, FL USA • Telephone: 863 655-4153 • Fax: 863 655-4334 • Posted October 12, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Pictures