IGNITION TOOL • WANTED DEAD OR ALIVE • Looking for ignition setting tool finger for Wright 3350-26, mounted on my AD4N. • Contact Christophe B. BRUNELIERE, Owner - located PUJAUT, FR France • Telephone: +33 6 08 96 80 29 . +33 4 90 26 36 60 . • Posted November 21, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

HELICOPTER TOOLING • AVAILABLE FOR SALE • Misc tooling: BELL 206 - BELL 47 • Contact Vaughn W. Crile - RED CARPET HELICOPTERS, Owner - located Edgewater, FL U.S.A. • Telephone: 386 566 1564 . 386 428 0187 . 386 428 1252 • Fax: 386 423 7522 • Posted November 20, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Pictures

UNIVERSAL AIRCRAFT JACKS • WANTED TO BUY • Universal aircraft jacks for use on both low and high wing retractables including 172RG and Bonanza. • Contact Douglas J. Cumins - NEW KENT AVIATION, LLC, End User - located Quinton, VA USA • Telephone: 804-514-0952 . 804-932-4220 . • Posted November 19, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

AIRCRAFT JACKS/TAIL WEIGHT • $325 • FOR SALE • I sold my airplane and no longer need my jacks/tail weight. The jacks are about 27" when fully retracted, and 46.5" when fully extended. The bases are 24"x24", each jack has a two piece locking collar. There is a removable machined cup on each rod for centering the aircraft jack point.(one cylinder rod was left extended and has a little surface rust). The tail weight is a steel platform on casters (2-rigid, 2-swivel with locks). There is a turnbuckle with clevis to make height adjustment easy. You will need to place bags of sand or concrete on the platform to the required weight. • Contact Steven P. Osborne, Owner - located Tucson, AZ USA • Telephone: 815-979-8534 . 520-578-1650 • Posted November 16, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Pictures

CRAFTSMAN 2 HP AIR COMPRES'R • FOR SALE • Craftsman 2h 220v belt dr A/C 20 gal tk. 100 obo. 6cf/100psi • Contact G. M. Skyman337, Owner - located KSAC, CA USA • Telephone: 916-421-7346 • Posted November 16, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

CHADWICK-HELMUTH 117 M-6A • $2,500 • CLEANING OUT THE HANGAR • two accelerometers, strobe with extra bulb, calibrator, scales, cables, two magnetic pickups, brackets, two 3229, two 3497, A-3392, three 3394, 3298, B-3496-2, two 3382, tab bending tool, manuals • Contact Glenn Myers, Owner - located Colfax, WA USA • Telephone: 509-397-4462 • Posted November 15, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

HIGHWING AIRCRAFT JACKS • $500 • AVAILABLE FOR SALE • Six ton capacity. 7 ft 8in. max lift. 40 inch adjustable. • Contact Lawrence H. Ray - RAY SKYRANCH, Owner - located Tucson, AZ USA • Telephone: 5206032491 • Posted November 13, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

USED HELICART • MAKE OFFER • 1985 HeliCart. Used for Jet Ranger, Long Ranger, Bell 407, Robinson R22 and 44. We accept offers. • Contact Lance Bierlink - HELITRANSPORTER, Owner - located Lynden, WA USA • Telephone: 360 220-8370 . 360 354-0470 . • Fax: 360 354-0470 • Posted November 13, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

DEADWEIGHT TESTER • $1,000 • ACCEPTING OFFERS • 2 each mansfield green deadweight pressure testers, used, clean and ready to overhaul.These are made by mansfielf green and are ready for overhaul, maintenance manual included. one has a guage 0-600 psi and with the proper guages pressure to 10000psi can be tested. please make your best offer. • Contact William F. Lowery - SPECIALIZED AIRCRAFT SERVICES, Owner - located Houston, TX USA • Telephone: 7138194152 . 2816485187 . 7136826033 • Posted November 11, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Pictures

ACFT CABLE TENSIONMETER • $500 • FOR SALE • Excellent condition. A must have for rigging aircraft control cables. • Contact Eddie Baker, Owner - located Kathleen, GA USA • Telephone: 478-218-5939 • Posted November 10, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

LINCOLN ARC WELDER TM300 • $600 • FOR SALE • 1 Phase 220 Volt. Selection of welding rods and rod oven included. • Contact Eddie Baker, Owner - located Kathleen, GA USA • Telephone: 478-218-5939 • Posted November 10, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

STEARMAN HOIST • $600 • FOR SALE • Antique acft eng hoist Needs to be refurbished - does operate well. • Contact Eddie Baker, Owner - located Kathleen, GA USA • Telephone: 478-218-5939 • Posted November 10, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

PULLER DISC FOR ROTAX STATORS • WANTED TO BUY • This puller plate bolts to a Rotax stator and has an anti-rotation tail on it Rotax part #876-081 • Contact Dave B. Red, End User - located Brownsville, OR USA • Telephone: 541-466-5119 • Posted November 10, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

WANTED GSC PROP ADJUSTING TOOL • WANTED TO BUY • 4 adjusting the angle on their Grnd adj props, Sometimes called a protractor Part #P4345-1 • Contact Dave B. Red, End User - located Brownsville, OR USA • Telephone: 541-466-5119 • Posted November 9, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

HOIST FRAME/ENGINE STAND • $3,000 • AVAILABLE IMMEDIATELY • Heavy Duty Frame built out of 4 inch tubular steel. It has large caster wheels. Good A/C cradle. • Contact Bennett Slack - THE AVIATION INSTITUTE OF MAINTENANCE, Owner - located Philadelphia, PA USA • Telephone: 267-745-1361 . 215-671-1016 . • Fax: 215-671-0566 • Posted November 8, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad