CAPELLA WITH ROTAX 670 • $10,000 • PROJECT FOR SALE • Side x side factory welded fuselage with aluminum wings, converted to a fast back much like the picture. Check left column of spec sheet for performance with 65hp engine, this one is 40% more hp. 92 hp Rotax 670 with 1.5 hrs and Ebox will need new needles and jets in carbs, radiator, and starter. Converted to cub style gear to get a Storch like stance. Will require a little welding, fuel tank repair, little wing repair, cowl fabrication, wind screen and partial rerivetting of one wing. Matco wheels and brakes. LSA per kit manufacturer. Too many projects and not enough time to work on them. • Contact Gerald "Alan" Selby , Owner - located Sand Springs, OK 74063 United States • Telephone: ---------- • Posted April 5, 2024 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Images

ROTAX 670 W EBOX • $7,100 • CLEANING OUT THE HANGAR • Rotax Rick built in 2014. Sold to me with reportedly only 1.5 hrs. I've never run it. The carbs I recieved lack most needles and jets and have manual chokes. I traded Rick a C box for an E box 2.26 ratio and a recoil starter neither of which have been installed. Lacks an engine starter but I have a non Rotax starter and brushes that can be made to work, just lack the starter's drive gear. Rotax exhaust and muffler included. Exhaust has been sectioned to fit the muffler inside the cowl but has not been rewelded. For Rick's current price you can have an almost completely repaired Capella too. • Contact Gerald "Alan" Selby , Owner - located Sand Springs, OK 74063 United States • Telephone: ---------- • Posted April 2, 2024 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Images