PIPER COLT FOR SALE • $6,000 • PROJECT FOR SALE • Fire wall back, no engine. Both wing tip need repair. Fab. is good.KLKV,Or 530 640 0870 cal/txt Jim • Contact James Bates , Owner - located Alturas, CA 96101 United States • Telephone: ---------- • Posted April 16, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

DAVISDA2 PARTS LANDING GEAR • $1,375 • ACCEPTING OFFERS • landing gear bars and cradles, and front fork • Contact Mike Tond , Owner - located Gatineau, QE J9H 2Y5 Canada • Telephone: ---------- • Posted April 14, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

1940 REARWIN • FOR SALE • Model 8125, aircraft project complete, but disassembled, new stainless exhaust, some new engine parts. $15,500.00 no tire kickers • Contact Gary Van Farowe - FLYING DUTCHMAN AVIATION , Owner - located Hudsonville, MI 49426 United States • Telephone: ---------- • Posted April 13, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

DAVISDA2 PARTS VERY GOOD START • $4,485 • ACCEPTING OFFERS • last chance before I cut up fuselage. have land gear, eng mount, tail area, plans set & wings etc, • Contact Mike Tond , Owner - located Gatineau, QE J9H 2Y5 Canada • Telephone: ---------- • Posted April 13, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

DAVISDA2 PARTS-TAIL EMPENAGE • $1,250 • ACCEPTING OFFERS • tail empennage includes the mixing box, cables and tail fins. • Contact Mike Tond , Owner - located Gatineau, QE J9H 2Y5 Canada • Telephone: ---------- • Posted April 13, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

DAVIS DA2 LONG WING PARTS • $924 • FOR BEST OFFER • disassembled long wing parts, ribs, spars, flaps ailerons, control rods • Contact Mike Tond , Owner - located Gatineau, QE J9H 2Y5 Canada • Telephone: ---------- • Posted April 11, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

DAVISDA2 PARTS - GAS TANK • $984 • ACCEPTING OFFERS • Gas tank for a Davis DA two seater • Contact Mike Tond , Owner - located Gatineau, QE J9H 2Y5 Canada • Telephone: ---------- • Posted April 11, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

DAVISDA2 PARTS - ENGINE MOUNT • $945 • ACCEPTING OFFERS • engine mount for continental engine • Contact Mike Tond , Owner - located Gatineau, QE J9H 2Y5 Canada • Telephone: ---------- • Posted April 10, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

SKYBOY PROJECT • AVAILABLE FOR SALE OR TRADE • 2001 Skyboy no engine , fabric removed ready to paint,airframe and instruments $5500.00 912 ready • Contact Greg Lucas , - located Scottsville, KY 42164 United States • Telephone: ---------- • Posted April 9, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

C-140 1947 N140TW • $12,000 • PROJECT FOR SALE • Finish the story of this project Lots has been done on N140TW so far. Too many Projects. • CESSNA 140 REBIRTH • Contact Dennis Harbin - RAG BAG AERO WORKS, INC , Owner - located Louisa, VA 23093-5760 United States • Telephone: ---------- • ---------- • ---------- • Posted April 6, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

RV-14A EMPENNAGE W/ALL TOOLS • $5,000 • SOLD FAST!! THANKS TO BARNSTORMERS • 2018 Vans RV-14a empennage kit for sale (no laser-cut parts). Vertical stabilizer and rudder are completed. I'm including every tool and fastener required to complete the build. This would include a 21 gallon 2.5 hp compressor, hose + reel; standing 5-speed drill press; 4'x8' work table; 2 18"x48" work benches; belt sander; wheel grinder; pneumatic drill; assorted drill bits; rivet gun w/assorted rivet sets; rivet squeezer w/assorted sets; assorted tungsten bucking bars; bucking plate; clecos; dimple press, all required fasteners. Located at KDVT in Phoenix, AZ. • Contact Roman Solene , Owner - located Peoria, AZ 85382 United States • Telephone: ---------- • Posted April 4, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

ALARUS PARTS/DONOR AIRFRAME • $2,250 • FOR SALE • Alarus CH2000 airframe. No power/avionics. gear/wing damage. lots of pics. Trade for exp. project. • Contact Eli Robinson , Owner - located Sandersville, GA 31082 United States • Telephone: ---------- • Posted April 3, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

7 CYL VERNER RADIAL • $12,000 • SOLD IMMEDIATELY !! • Here is a aircraft called the TLAR which was built in 1974 with with 430 Hrs. on it and the Verner 7HI with only run time on it. The engine runs great and is carburated right now with the option of fuel injection. Also I have the dual ignition heads and harness that will go with it. Along with another carb. The reason I'm selling is because it only produces 16 Amps of power which isn't enough for my needs. There's alot more info and Pictures of the wings and flight controls etc. so please contact me for the info...Thanks!! • Contact Frank Corcoran , Owner - located Rochelle, IL 61068 United States • Telephone: ---------- • Posted March 31, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Images

ZENITH CH750 CRUZER AIRFRAME • $37,000 • FOR SALE BY BUILDER • 80% Completed airframe to firewall. Must sale to make room for a purchased aircraft. Upgrades include dual brakes, disc strut, center console, bubble doors, 4point harness, adjustable seat pans, parking brake. TailbeaconX installed. iLevel autopilot pitch tab and servo installed on elevator. Roll tab and servo included but not installed. Fuel system and tanks plus windscreens not installed but included. All hardware/Cleco's associated with the airframe included. Pitot static system installed up to cockpit Everything must go. Avionics can be included for a discount price. Built by A&P mechanic. • Contact Craig Smith , - located Mesa, AZ 85202 United States • Telephone: ---------- • Posted March 27, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Images

LANCAIR 235/O-320 PROJECT • $46,779 • AVAILABLE FOR SALE • 80% complete kit with engine/prop at KSGR. Call/email for detailed builder's log, photos, expenses. • Contact Jeffrey Foltz , Owner - located Richmond, TX 77406 United States • Telephone: ---------- • Posted March 22, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

GP4 PROJECT • $16,000 • AVAILABLE FOR SALE • Pereira GP4. Amazing workmanship by cabinet maker. Fuselage done with horizontal stab and VF and rudder all attached and body worked. Fuselage already covered with fiberglass. Windshield bow and canopy bow already laminated. header tank done. Wing out of jig but requires plywood cover and wing tanks. Ailerons and flaps. Gear and steel parts welded and ready for powder coating. Builder spent 9 years building to this expert level. Truly beautiful work. Level build table included if wanted. • Contact Jim Frank , Owner - located Atlanta, GA 30305 United States • Telephone: ---------- • Posted March 18, 2025 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Images